Oil and Gas Hazardous Safety Classification
In industries like oil & gas, chemicals, and petrochemicals, safety is of utmost importance, especially when dealing with flammable gases, vapors, and dust. One crucial aspect of safety is hazardous area classification (HAC), the process of identifying areas where an explosive atmosphere may exist. Proper classification helps prevent fires and explosions, protects employees, and ensures compliance with industry standards.
What is Hazardous Area Classification?
Hazardous Area Classification involves dividing a facility into zones based on the likelihood and duration of the presence of flammable substances. This classification ensures that appropriate safety measures are implemented and suitable equipment is used to prevent ignition.
Classification of Hazardous Areas (IEC Standard)
1) Zone 0: explosive atmosphere present continuously or for long periods.
Example: inside storage tanks containing flammable liquids or gases.
2) Zone 1: Explosive atmosphere present occasionally during normal operations.
Example: Areas near pump seals or vent systems.
3) Zone 2: Explosive atmosphere is unlikely during normal operations but may occur for short periods.
Example: Areas around flanges, valves, or piping connections.
Divisions (NFPA/NEC Standard)
Division 1: Corresponds to Zones 0 and 1 (high-risk areas).
Division 2: Corresponds to Zone 2 (lower-risk areas).
Gas Groups and Temperature Classes
Hazardous gases are classified based on their flammability and ignition temperature:
🔹 Gas groups:
Group IIA: Propane
Group IIB: Ethylene
Group IIC: Hydrogen, Acetylene
🔹 Temperature Classes (T-Code):
Equipment must not exceed the ignition temperature of the gases in the area.
T1: ≤ 450°C
T2: ≤ 300°C
T3: ≤ 200°C
T4: ≤ 135°C
T5: ≤ 100°C
T6: ≤ 85°C
Steps to Perform Hazardous Area Classification
1) Identify Flammable Substances: analyze the types of gases, vapors, or dust present.
2) Determine Sources of Release: Identify potential release points (e.g., vents, pumps).
3) Classify Zones: Define areas as Zone 0, Zone 1, or Zone 2 based on the likelihood of explosive atmosphere presence.
4) Select Suitable Equipment: Use explosion-proof equipment (ex-rated) that matches the area’s classification.
International Standards for HAC:
IEC 60079: International standard for explosive atmospheres
NFPA 497: U.S. standard for hazardous locations
ATEX Directive: European standard for hazardous area equipment
IS/IEC 60079: Indian standard for explosive atmospheres